Description
KOLEEX XF-2100CP-ED Digital Fabric Inspection Machine
The KOLEEX XF-2100CP-ED is a digital multi-fabric inspection machine built for knit, woven, elastic and other general fabrics. It is designed for the fabric-checking stage of garment and textile production, where rolls of fabric are examined for defects, measured and graded before moving on to cutting or further processing. Supplied and supported in Bangladesh by TSLMAC, the XF-2100CP-ED brings computerized inspection and reporting to factories that currently rely on manual, paper-based fabric checking.
Where It Fits in Garment and Textile Production
Fabric inspection is one of the most important quality-control checkpoints in a garment factory. Before fabric reaches the cutting table, quality teams need to confirm width, roll length and defect locations so that cutting planners can avoid faulty sections and factories can settle claims with fabric mills. The XF-2100CP-ED is built for this task, handling knit and woven fabric up to 2050mm (80″) wide at an adjustable inspection speed of 1-30 m/min, so it can be matched to the fabric type and the checker’s working pace.
How the Machine Works
Fabric is fed from a roll and passed under upper and lower LED light lamps that illuminate the surface from both sides, making it easier for the operator to spot holes, stains, slubs and other defects. An electric eye sensor controls the release of fabric without pulling it taut, which matters for high-elastic knit fabrics that would otherwise stretch and give a false reading of width or defect size. An infrared ray edge alignment system keeps the fabric running straight across the machine, while a fabric spreading roller flattens wrinkles before the fabric passes under the light. Output fabric is rewound onto a roll of up to 400mm diameter.
Key Functions and Features
What sets the XF-2100CP-ED apart from a basic light-table frame is its computerized data system:
- Touch-enabled lamp panel – the operator taps directly on the panel to mark a defect position, and the system automatically records its location on the roll.
- Standardized data recording – an integrated industrial computer logs every marked defect, building a digital inspection record instead of a handwritten one.
- Automated grading and reporting – the system rates fabric per the American 4-point grading system and can instantly generate and print an inspection report.
- Digital counter – fabric length is measured automatically and can be switched between meters and yards.
- Forward/reverse re-inspection – the roll can be run backward to re-check a section without unloading the fabric.
- Optional ERP/MES integration – the inspection system can connect with a factory’s existing management software.
Technical Details
| Brand | KOLEEX |
|---|---|
| Model | XF-2100CP-ED |
| Machine Type | Digital Multi-Fabric Inspection Machine |
| Suitable For | Knit, woven, elastic and general fabric |
| Max. Fabric Width | 2050mm (80") |
| Fabric Input / Output | Roll/Relaxing input, Roll output |
| Max. Roll Diameter | 400mm |
| Inspection Speed | 1-30 m/min (adjustable) |
| Total Power | 1.3kW |
| Voltage | 1-phase AC 220V, 50Hz |
Why Choose KOLEEX XF-2100CP-ED?
- Accurate American 4-point fabric grading system
- Touch-enabled lamp panel for fast defect marking
- Electric eye prevents high-elastic fabric stretching
- Infrared edge alignment keeps fabric straight
- Supports forward and reverse re-inspection
- Optional ERP/MES integration with factory systems
- Wide 2050mm fabric width for large rolls
- Adjustable 1-30 m/min inspection speed
- TSLMAC spare-parts and servicing support in Bangladesh
- Technical consultation and machine sourcing from TSLMAC
Practical Benefits for Garment Factories
Moving from manual fabric checking to a computerized system like the XF-2100CP-ED brings practical advantages for quality and merchandising teams. Defect locations are recorded automatically rather than written by hand, reducing avoidable transcription errors and speeding up the handover between checkers, cutting planners and merchandisers. Because grading follows the American 4-point system, reports stay consistent from roll to roll and checker to checker, which is useful when reporting quality back to fabric suppliers or buyers. The electric eye tension control and infrared edge alignment help keep measurements accurate on stretch and elastic fabrics that are otherwise difficult to check by hand, and the meter/yard switch keeps the machine usable across different buyer and market requirements.
Verified Technical Configuration
The XF-2100CP-ED is built for knit and woven fabric up to 2050mm (80″) wide, with fabric fed as roll/relaxing input and rewound as a roll output of up to 400mm diameter. Inspection speed is adjustable from 1 to 30 m/min, total power draw is 1.3kW, and the machine runs on single-phase AC 220V, 50Hz power. Optional add-ons in this KOLEEX inspection line include an edge cutter, a length/end cutting device and a fabric weighing system for factories that want to combine inspection with these downstream steps.
TSLMAC After-Sales and Spare-Parts Support
A fabric inspection machine like the XF-2100CP-ED runs continuously through a factory’s working hours, so its lamps, rollers, sensors, motor and control electronics will eventually need servicing or replacement. TSLMAC treats spare-parts support as a core part of owning this kind of machine, working to stock, source and arrange components such as light lamps, edge-alignment and tension sensors, rollers and control/electrical parts as the need arises. Beyond parts, TSLMAC’s technical personnel can assist with installation, troubleshooting and preventive maintenance, keeping inspection downtime to a minimum on a machine quality teams depend on every shift.
Software and System Support
Because the XF-2100CP-ED includes a computerized defect-logging and reporting system, TSLMAC can also assist with the software side of ownership – configuring the inspection system, connecting the optional ERP/MES integration to a factory’s existing platforms, and providing technical guidance so the reporting output fits the buyer’s or factory’s quality workflow.
Sourcing Support and Long-Term Partnership
TSLMAC maintains a broad network of garment and textile machinery and spare parts, and where a required component is not immediately in stock, TSLMAC can work through its manufacturer and supplier network to source it, including expedited sourcing from China in approximately 48 hours where the requirement and logistics route allow. TSLMAC approaches the sale of an inspection machine like the XF-2100CP-ED as the start of an ongoing relationship rather than a one-time transaction, and can also work with garment manufacturers through service contracts covering routine inspection, preventive maintenance and spare-parts planning for this and other machines on the factory floor.
Machine Selection and Consultation
Choosing the right fabric width, roll diameter and optional features for an inspection machine depends on a factory’s fabric mix and production volume. TSLMAC’s technical team can help compare the XF-2100CP-ED against other models in the KOLEEX inspection range and advise on the configuration that best fits a given production line.
Get a Quotation
Contact TSLMAC for current pricing, availability and configuration options for the KOLEEX XF-2100CP-ED digital fabric inspection machine, or to discuss spare parts, servicing and software support for your existing inspection line.
There are no reviews yet.