Description
KOLEEX 450MS/500MS/600MS Fusing Machine
The KOLEEX 450MS/500MS/600MS is an automatic belt warping prevention fusing machine designed for garment and textile factories that need consistent, reliable fusing of interlining and bonded fabric layers. Available in three fusing-width configurations — XF-450MS, XF-500MS and XF-600MS — this machine is built to keep the fusing belt tracking correctly during continuous production, reducing the misalignment problems that commonly affect conventional fusing lines. For garment manufacturers in Bangladesh sourcing dependable fusing equipment, the KOLEEX series offers a practical balance of automation, build quality and operator convenience.
Industrial Application
Fusing machines are a core part of the cutting and preparation stage in garment production, where interlining, collars, cuffs, plackets and other reinforced components are permanently bonded using controlled heat, pressure and belt speed. The KOLEEX 450MS/500MS/600MS is suited to factories running shirt, jacket, uniform and similar woven-garment lines where dependable interlining adhesion directly affects finished-garment quality. Its mobile, caster-wheel stand allows the unit to be repositioned within a cutting or preparation section as layout needs change.
How It Works
Fabric layers are fed onto the moving fusing belt, which carries them through a heated pressing zone at an adjustable belt speed. The upper and lower belt-warping prevention systems use a direct limit switch mechanism to detect and correct belt drift automatically, keeping the belt centered during operation. A rubber driving roller provides non-slip belt movement, while an integrated rotary strip-off device helps separate finished material cleanly from the belt at the machine’s exit.
Important Functions & Features
- Dual belt-warping prevention on both the upper and lower belts using a direct limit switch design
- Non-slip rubber driving roller for consistent belt traction
- Rotary strip-off device to assist clean separation of fused material
- Adjustable heating time of approximately 5 to 20 seconds to suit different fabric and interlining combinations
- Maximum operating temperature of 195°C and maximum pressure of 1.5kg/cm²
- Fusing widths of 450mm, 500mm or 600mm depending on the selected model
Practical Production Benefits
A belt that consistently tracks straight reduces the risk of uneven fusing pressure, wrinkled output and unplanned stoppages for manual belt adjustment. This can support smoother workflow on the fusing line and more consistent bonding results across a production run. The mobile stand and caster wheels add flexibility for factories that reorganize their preparation section periodically, while the rotary strip-off device is intended to make material handling at the machine’s exit more convenient for operators.
Technical Details
| Brand | KOLEEX |
|---|---|
| Model | XF-450MS / XF-500MS / XF-600MS |
| Machine Type | Automatic Belt Warping Prevention Fusing Machine |
| Power Supply | 220V |
| Rated Output | Heater: 4KW / Motor: 370W |
| Max Temperature | 195°C |
| Max Pressure | 1.5kg/cm² |
| Fusing Width | 450mm (XF-450MS) / 500mm (XF-500MS) / 600mm (XF-600MS) |
| Max Belt Speed | 8.7m/min (XF-450MS) / 14m/min (XF-500MS & XF-600MS) |
| Heating Time | 5 ~ 20 sec |
Why Choose KOLEEX 450MS/500MS/600MS Fusing Machine?
- Direct limit switch belt warp prevention
- Non-slip rubber driving roller design
- Automatic rotary strip-off device included
- Fusing widths available from 450mm to 600mm
- Adjustable heating time from 5 to 20 seconds
- Stable 220V single-phase power supply
- Mobile stand with caster wheels
- TSLMAC spare-parts support for fusing components
- TSLMAC technical servicing and maintenance assistance
- TSLMAC sourcing support for urgent requirements
Verified Technical Configuration
All three KOLEEX models operate on a 220V power supply with a 4KW heater and 370W motor, a maximum temperature of 195°C and maximum pressure of 1.5kg/cm². The XF-450MS runs at a maximum belt speed of 8.7m/min, while the XF-500MS and XF-600MS run at a maximum belt speed of 14m/min. Heating time across the range is adjustable between roughly 5 and 20 seconds, and fusing width scales with the selected model from 450mm up to 600mm. Full dimension and net-weight figures for each model are listed in the Technical Details table below.
TSLMAC After-Sales & Spare-Parts Support
Like any belt-driven fusing machine, the KOLEEX 450MS/500MS/600MS will require periodic maintenance and replacement of wear items such as belts, rollers, heating and control components over its working life. TSLMAC places strong emphasis on long-term spare-parts support for fusing equipment, combining stocked parts, sourcing through its supplier network and technical personnel who understand belt-driven fusing systems. When a specific component is needed for servicing or repair, TSLMAC’s technical team can help identify and arrange the correct part rather than leaving the factory to search independently.
Sourcing Support
TSLMAC maintains a broad range of garment machinery and spare parts, and where a specific KOLEEX component or accessory is not immediately available locally, TSLMAC can work through its manufacturer and supplier network to source it. For urgent requirements, TSLMAC can also arrange expedited sourcing from China, including approximately 48-hour arrangements where the specific requirement and logistics route permit.
Long-Term Technical Partnership
TSLMAC approaches the supply of a fusing machine like the KOLEEX 450MS/500MS/600MS as the start of an ongoing technical relationship rather than a one-time sale. This can extend to preventive maintenance visits, troubleshooting support, spare-parts planning and, where agreed, structured service contracts covering routine inspection and scheduled servicing — helping factories keep fusing lines running with fewer unplanned interruptions.
Consultation & Machine Selection
Because the KOLEEX series is available in three fusing widths, TSLMAC’s technical team can help factories select the model — 450MS, 500MS or 600MS — best matched to their production volume, garment types and available floor space.
Get a Quotation
Contact TSLMAC for current availability, pricing and technical configuration of the KOLEEX 450MS/500MS/600MS fusing machine, along with guidance on spare parts, servicing and sourcing support for your production line.
There are no reviews yet.