Description
Koleex XF-A03 Fabric Inspection Machine for Woven and Knit Fabrics
The Koleex XF-A03 is a fabric inspection and rolling machine designed for garment and textile manufacturing facilities that need to inspect, measure and re-roll woven and knit fabric before cutting or dispatch. Positioned between fabric receiving and the cutting room, the XF-A03 gives quality-control teams a practical way to check fabric condition while automatically recording roll length, helping factories reduce fabric waste and catch defects before they reach production.
Industrial Application
Fabric inspection machines like the XF-A03 are used by quality-control and fabric-store teams in woven and knit garment factories, denim mills and textile trading houses. As fabric is unwound from the supply roll and passed over the inspection table, operators visually check for weaving faults, knitting defects, stains, holes and shading issues before the fabric is approved for cutting. The Koleex line offers several XF-A03 configurations for different fabric types and finishing requirements, including versions oriented toward folding or rolling finish, for woven fabric, knit fabric, or both, so factories can select the configuration that matches their fabric-handling workflow.
How It Works
The machine unwinds fabric from the source roll across an illuminated inspection table, where the operator reviews the fabric surface for defects. A control panel with a digital counter tracks the length of fabric passing through, so the exact yardage of each roll is recorded automatically rather than measured by hand. A fabric-end detection function keeps a longer tail of fabric available at the end of each roll, making it easier for the operator to start the next roll without extra pulling or repositioning. An edge-detection system also monitors the fabric edge and helps keep it aligned as the roll is re-formed, supporting a tidier, straighter finished roll.
Important Functions and Features
- High-precision length counter for accurate roll-length records, useful for stock control and costing.
- Fabric-end detection that preserves a workable fabric tail, reducing rethreading time between rolls.
- Stepless frequency-conversion speed control with a separate operation panel, allowing release speed to be adjusted at any time to suit different fabric tensions.
- Automatic edge detection and alignment, helping keep the rolled fabric edge straight and consistent.
- Wide cloth-width capacity, suited to the wider fabric widths common in woven and knit production.
Technical Details
| Brand | Koleex |
|---|---|
| Model | XF-A03 |
| Machine Type | Fabric Inspection Machine (Woven & Knit) |
| Voltage | 220V / 50Hz |
| Power | 2.4KW |
| Speed | 0-50 M/Min |
| Max Cloth Width | 1600-2500MM |
| Roll Diameter | Up to 450MM |
| Net Weight | 220-370KG |
| Fabric Weight Capacity | 120KG |
Why Choose Koleex XF-A03?
- High-precision counter for accurate roll length
- Automatic detection and alignment of fabric edge
- Stepless frequency control for smooth tensioning
- Suitable for both woven and knit fabrics
- Wide 1600-2500mm cloth width capacity
- Fabric-end detection reduces re-threading effort
- Separate operation panel for flexible speed control
- TSLMAC offers dedicated spare-parts support
- Access to TSLMAC technical servicing and maintenance
- TSLMAC can source components through its supplier network
Practical Production Benefits
For a fabric store or QC department, the main value of a dedicated inspection-and-rolling machine is consistency. Automatic length counting removes the guesswork and manual-measurement error that comes with hand-rolling fabric, while the adjustable stepless speed control lets operators match the machine’s pace to the stretch and tension characteristics of different woven or knit fabrics. The fabric-end detection and edge-alignment functions reduce the repetitive handling that otherwise slows down roll-to-roll changeovers, and a properly aligned, evenly rolled fabric is also easier to handle safely and store in the fabric warehouse.
Verified Technical Configuration
The Koleex XF-A03 operates on a 220V/50Hz supply and draws approximately 2.4KW, with a working speed of up to 0-50 metres per minute. It is built to handle fabric rolls up to around 120KG in weight, with a maximum cloth width in the 1600-2500mm range and a roll diameter of up to 450mm. Net weight falls in the 220-370KG range depending on configuration. These figures make the XF-A03 suitable for mid-to-large fabric stores handling standard woven and knit fabric widths used in garment manufacturing.
TSLMAC After-Sales and Spare-Parts Support
Like any inspection and rolling machine that runs continuously in a busy fabric store, the XF-A03 depends on its motor, sensors, control panel and mechanical rollers staying in good working condition over years of use. TSLMAC supports these ownership needs through a combination of stocked and sourced spare parts, technical personnel and troubleshooting knowledge covering the machine’s motor, drive components, control electronics and sensor systems. Where a required part is not immediately on hand, TSLMAC can also work through its manufacturer and supplier network to source it, including expedited sourcing from China in approximately 48 hours where the specific part, supplier availability and logistics route allow.
Technical and Software Support
Beyond spare parts, TSLMAC’s technical team can assist with installation, calibration of the counting and edge-detection systems, and general troubleshooting for the control panel and drive system, helping keep the machine’s inspection accuracy and roll quality consistent over time.
Sourcing Support
Because fabric-inspection lines vary by configuration, whether folding or rolling finish, woven, knit, or combined fabric handling, TSLMAC maintains a broad machinery and spare-parts network and can help identify or source the specific Koleex XF-A03 configuration or related components that best match a factory’s fabric-handling requirement.
Long-Term Technical Partnership
TSLMAC approaches the supply of machines like the XF-A03 as the start of an ongoing technical relationship rather than a single transaction, with continued support available through spare parts, servicing, technical consultation and machine-selection guidance as a factory’s fabric-handling needs evolve. Where useful, this can also extend to a structured service arrangement covering routine inspection, preventive maintenance and spare-parts planning.
Get a Quotation
Factories evaluating a fabric inspection and rolling solution for woven or knit fabric are welcome to contact TSLMAC for current availability, configuration options and pricing on the Koleex XF-A03, as well as technical consultation on spare parts and after-sales support.
There are no reviews yet.