Description
XF-1800B-JS-ED Automatic Edge Alignment Fabric Inspection Machine
The XF-1800B-JS-ED is an automatic edge alignment heavy fabric inspection machine designed for regular woven fabric. It combines fabric inspection with roll-to-roll or relax-to-roll rolling and relaxing functions in a single working line, making it a practical addition to the quality-control stage of a garment or textile factory. The machine is built to help production and quality teams identify fabric defects accurately while keeping the roll edges properly aligned and the fabric under controlled tension throughout the process.
Industrial Application
Fabric inspection is one of the most important checkpoints before cutting and sewing begin, since undetected defects at this stage can lead to costly rework or rejected garments later in production. The XF-1800B-JS-ED is positioned for this stage, allowing quality-control operators to inspect woven fabric rolls while simultaneously re-rolling or relaxing them under even tension. Its edge alignment and tension-control functions make it particularly useful for factories handling high-elastic or delicate woven fabrics that are prone to stretching or misalignment during manual handling.
How It Works
As fabric passes through the machine, an electric eye sensor monitors the release of fabric and controls tension so the material is not pulled or stretched, which is especially important for high-elastic fabrics. An infrared ray edge alignment system continuously tracks the fabric edge and keeps the roll square and evenly wound, reducing uneven or telescoped rolls. A built-in spreading and smoothing function helps flatten the fabric as it travels through the machine, which is useful for knitted as well as woven materials. Operators can monitor length using a digital counter that switches between meter and yard units, and upper and lower LED lighting illuminates the fabric surface so surface defects are easier to spot during inspection.
Important Functions & Features
- Combined fabric inspection with rolling (roll-to-roll) and relaxing (relax-to-roll) operation
- Electric eye sensor tension control to protect high-elastic fabrics from stretching
- Infrared ray automatic edge alignment system
- Spreading and smoothing function suited to knitted fabrics as well as woven fabric
- Digital counter with meter/yard switching for accurate length tracking
- Upper and lower LED lighting for consistent defect visibility
- Forward and reverse re-inspection capability
Technical Details
| Model | XF-1800B-JS-ED |
|---|---|
| Machine Type | Automatic Edge Alignment Fabric Inspection Machine |
| Application | Woven fabric inspection, rolling & relaxing |
| Max. Fabric Width | 1750mm (69") |
| Max. Roll Diameter | 400mm |
| Inspection Speed | 0-35 m/min |
| Voltage | 1-phase AC 220V, 50Hz, 2.2kW |
| Overall Dimensions | 2210 x 1800 x 2250 mm |
| Brand | Confirm with TSLMAC |
| Weight | Confirm with TSLMAC |
Why Choose XF-1800B-JS-ED?
- Automatic infrared edge alignment reduces manual work
- Electric eye tension control protects elastic fabrics
- Suitable for woven and knitted fabric inspection
- Digital counter switches between meter and yard
- Upper and lower LED lighting included
- Supports forward and reverse re-inspection
- Optional edge cutter and weighing attachments available
- Backed by TSLMAC's genuine spare-parts support
- Technical consultation available for machine selection
- TSLMAC can arrange sourcing for related parts
Practical Production Benefits
By automating edge alignment and tension control, the XF-1800B-JS-ED can help reduce the manual adjustment that inspection operators would otherwise need to perform by hand, supporting more consistent roll quality across a shift. The forward-and-reverse re-inspection function allows a section of fabric to be reviewed again without unloading and reloading the roll, which can make the inspection process more flexible. Clear LED lighting supports more reliable visual defect detection, while the digital counter helps quality-control and production-planning teams keep accurate yardage or meterage records. These functions are intended to support day-to-day inspection consistency and operator convenience rather than guarantee a specific output figure.
Verified Technical Configuration
The XF-1800B-JS-ED is built to handle a maximum fabric width of 1750mm (69\”) and a maximum roll diameter of 400mm, with an inspection and rolling speed of 0-35 m/min. It runs on a single-phase AC 220V, 50Hz, 2.2kW power supply, and its overall footprint is approximately 2210 x 1800 x 2250 mm. Optional attachments including an edge cutter, a length/end cutting device, and a fabric weighing system can be added depending on a factory’s specific inspection and rolling requirements.
TSLMAC After-Sales & Spare-Parts Support
Like any inspection and rolling machine, the XF-1800B-JS-ED will require periodic maintenance of its moving components, sensors, control electronics, LED lighting, and drive parts over its working life. TSLMAC works with leading garment-machinery manufacturers and industry partners to support this ongoing need, maintaining stocked spare parts, sourcing capability, and technical personnel who can assist with troubleshooting, servicing, and preventive maintenance for fabric inspection and rolling machinery. Because inspection machines are used continuously in quality-control lines, keeping sensor, electrical, and mechanical components readily serviceable is an important part of TSLMAC’s support approach, helping factories avoid unnecessary downtime.
Software & Sourcing Support
Where a machine’s digital counter or control system requires configuration or calibration support, TSLMAC’s technical team can assist with machine setup and operational guidance. For requirements that are not immediately available locally, TSLMAC also works through its manufacturer and supplier network to source related machinery, equipment, and spare parts, and for urgent needs can arrange expedited sourcing from China, including approximately 48-hour arrangements where the specific requirement and logistics route permit.
Long-Term Technical Partnership
TSLMAC approaches machinery supply as the beginning of an ongoing technical relationship rather than a single transaction. Depending on a factory’s needs, this can extend to spare-parts supply, maintenance support, servicing, technical consultation, and machine-selection guidance as production requirements evolve. TSLMAC can also work with garment manufacturers through ongoing service arrangements covering routine inspection, preventive maintenance, and spare-parts planning where such an arrangement is agreed.
Consultation & Machine Selection
Because fabric inspection requirements differ by fabric type, width, and production volume, TSLMAC’s technical team can help factories confirm whether the XF-1800B-JS-ED, or an alternative configuration, best matches their specific woven and knitted fabric inspection needs.
Get In Touch
For current availability, machine configuration, spare parts, or technical consultation on the XF-1800B-JS-ED automatic edge alignment fabric inspection machine, contact TSLMAC to request a quotation and discuss your factory’s inspection line requirements.
There are no reviews yet.