Description
XF-A06-1 Automatic Fabric Loader
The XF-A06-1 is an automatic fabric loader built for garment and textile cutting rooms, designed to lift and present fabric rolls to a fabric spreading machine without repeated manual handling. It is placed alongside a spreading table, where it raises a loaded fabric roll to the correct working height so a single operator can push the roll onto the spreader and begin the spreading process.
Industrial Application
In a typical cutting-room workflow, fabric rolls must be lifted onto a spreading machine before spreading and cutting can begin. Manually lifting heavy rolls is slow, physically demanding and increases the risk of operator strain, particularly when a factory runs multiple roll changes per shift. The XF-A06-1 is intended to sit between fabric storage and the spreading line, supporting the loading stage of production so that spreading operators can focus on feeding and controlling the fabric rather than lifting it.
How It Works
The machine uses a motor-driven lifting mechanism to raise a two-tier pallet frame. The height can be set by the operator, and the lift stops automatically once it reaches the pre-set height, removing the need to watch and manually stop the lift at the correct point each time. The lower pallet section has its own movable wheels, so once the fabric roll has been raised to the required height, one worker can push the roll directly onto the spreader without help from a second person. The entire loader frame is also mounted on caster wheels with brakes, allowing it to be moved into position for use and then locked firmly in place during operation.
Important Functions and Features
- Automatic height stop for consistent, repeatable loading height
- Movable pallet wheels that allow single-operator loading onto the spreader
- Brake-equipped mobility for safe positioning and fixing during use
- Simple mechanical structure intended for straightforward day-to-day maintenance
- Roller width sized to accommodate a range of fabric roll widths
These functions are directed at a very practical cutting-room problem: getting a heavy fabric roll from floor or storage height up onto a spreading table quickly, safely and with minimal manual effort.
Technical Details
| Model | XF-A06-1 |
|---|---|
| Machine Type | Automatic Fabric Loader |
| Voltage | 220V |
| Power | 850W–1000W |
| Maximum Lift Capacity | 220KG–250KG |
| Lifting Speed | 19M/MIN |
| Lifting Height | 1.5M |
| Width of Roller | 1750MM–3250MM |
| Net Weight | 80KG–100KG |
| Machine Size | 2130–2630 × 600 × 2000MM |
Why Choose XF-A06-1 Automatic Fabric Loader?
- Automatic height stop reduces manual adjustment
- Movable pallet lets one worker load fabric
- Brake-equipped wheels allow safe positioning
- Simple structure designed for easy maintenance
- Wide roller range fits multiple fabric rolls
- Sturdy frame built for daily factory use
- TSLMAC stocks and sources genuine spare parts
- Technical support available for installation and servicing
- TSLMAC can arrange expedited sourcing from China
- Long-term technical partnership beyond the initial purchase
Practical Production Benefits
Because the lifting height stops automatically, roll loading becomes more consistent from one changeover to the next, which can help spreading operators start each new roll from the same working position. The ability for one worker to load fabric independently can support smoother workflow during frequent roll changes, since a second helper is not required to steady or lift the roll. The mobile, brake-equipped base also gives factories flexibility in how the loader is positioned relative to different spreading tables, while still allowing it to be locked securely once positioned.
Verified Technical Configuration
Based on the supplied specification table, the XF-A06-1 operates on a 220V supply with a motor power in the range of 850W–1000W, a maximum lifting capacity of approximately 220KG–250KG, a lifting speed of around 19M/MIN, and a lifting height of up to 1.5M. The roller width is listed between 1750MM and 3250MM, with a net weight of roughly 80KG–100KG and an overall machine footprint of approximately 2130–2630 × 600 × 2000MM. As the supplied table lists these as ranges, buyers should confirm the exact figures that apply to the specific unit being quoted.
TSLMAC After-Sales and Spare-Parts Support
Like any motorised lifting equipment used continuously in a cutting room, the XF-A06-1 will require ongoing maintenance over its working life, including attention to its lifting motor, drive components, wheels, brakes and structural fasteners. TSLMAC places strong emphasis on long-term spare-parts support for the machinery it supplies, working to stock, source and arrange the components needed to keep loading equipment running reliably. Where a specific part is not immediately on hand, TSLMAC can draw on its manufacturer and supplier network to locate and arrange the required component.
Technical Support and Sourcing
Beyond parts, TSLMAC’s technical personnel can assist with installation guidance, troubleshooting and routine servicing of loading and spreading equipment. For requirements that cannot be met from local stock, TSLMAC can also work through its supplier network to source machinery or components from China, including expedited arrangements of approximately 48 hours in cases where the specific requirement, supplier availability and logistics route allow it.
Long-Term Partnership and Service Options
TSLMAC approaches the supply of equipment such as the XF-A06-1 as the start of an ongoing technical relationship rather than a single transaction. Depending on a factory’s needs, this can extend into structured service arrangements covering periodic inspection, preventive maintenance and spare-parts planning, helping the loader remain dependable across repeated production cycles. TSLMAC’s technical team is also available to advise on selecting the right loading equipment for a factory’s fabric roll sizes, weights and production volume.
Get in Touch
For current pricing, configuration options, spare parts or technical consultation on the XF-A06-1 Automatic Fabric Loader, contact TSLMAC to discuss your cutting-room requirements.
There are no reviews yet.